Pass Guaranteed Fortinet Marvelous NSE7_EFW-7.2 - Real Fortinet NSE 7 - Enterprise Firewall 7.2 Question

Blog Article

Tags: Real NSE7_EFW-7.2 Question, NSE7_EFW-7.2 Valid Exam Pdf, NSE7_EFW-7.2 Reliable Exam Labs, New NSE7_EFW-7.2 Exam Papers, NSE7_EFW-7.2 Reliable Braindumps Sheet

The Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) Desktop-based practice Exam is ideal for applicants who don't have access to the internet all the time. You can use this NSE7_EFW-7.2 simulation software without an active internet connection. This NSE7_EFW-7.2 software runs only on Windows computers. Both practice tests of Exam4Labs i.e. web-based and desktop are customizable, mimic Fortinet NSE7_EFW-7.2 Real Exam scenarios, provide results instantly, and help to overcome mistakes.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

Topic	Details
Topic 1	Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.
Topic 2	Central management: The topic of Central management covers implementing central management.
Topic 3	System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.
Topic 4	Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
Topic 5	VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.

>> Real NSE7_EFW-7.2 Question <<

Fast Download Fortinet Real NSE7_EFW-7.2 Question Are Leading Materials & Hot NSE7_EFW-7.2: Fortinet NSE 7 - Enterprise Firewall 7.2

Exam4Labs IT Certification has years of training experience. Exam4Labs Fortinet NSE7_EFW-7.2 exam training materials is a reliable product. IT elite team continue to provide our candidates with the latest version of the NSE7_EFW-7.2 exam training materials. Our staff made great efforts to ensure that you always get good grades in examinations. To be sure, Exam4Labs Fortinet NSE7_EFW-7.2 Exam Materials can provide you with the most practical IT certification material.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q34-Q39):

NEW QUESTION # 34
Exhibit.

Refer to the exhibit, which shows a partial touting table
What two concisions can you draw from the corresponding FortiGate configuration? (Choose two.)

A. OSPI is configured to run over IPSec.
B. IPSec Tunnel aggregation is configured
C. net-device is enabled in the tunnel IPSec phase 1 configuration
D. add-route is disabled in the tunnel IPSec phase 1 configuration.

Answer: C,D

Explanation:
* Option B is correct because the routing table shows that the tunnel interfaces have a netmask of
255.255.255.255, which indicates that net-device is enabled in the phase 1 configuration. This option allows the FortiGate to use the tunnel interface as a next-hop for routing, without adding a route to the phase 2 destination1.
* Option D is correct because the routing table does not show any routes to the phase 2 destination networks, which indicates that add-route is disabled in the phase 1 configuration. This option controls whether the FortiGate adds a static route to the phase 2 destination network using the tunnel interface as the gateway2.
* Option A is incorrect because IPSec tunnel aggregation is a feature that allows multiple phase 2 selectors to share a single phase 1 tunnel, reducing the number of tunnels and improving performance3.
This feature is not related to the routing table or the phase 1 configuration.
* Option C is incorrect because OSPF is a dynamic routing protocol that can run over IPSec tunnels, but it requires additional configuration on the FortiGate and the peer device4. This option is not related to the routing table or the phase 1 configuration. References: =
* 1: Technical Tip: 'set net-device' new route-based IPsec logic2
* 2: Adding a static route5
* 3: IPSec VPN concepts6
* 4: Dynamic routing over IPsec VPN7

NEW QUESTION # 35
Exhibit.

Refer to the exhibit, which contains a CLI script configuration on fortiManager. An administrator configured the CLI script on FortiManager rut the script tailed to apply any changes to the managed device after being executed.
What are two reasons why the script did not make any changes to the managed device? (Choose two)

A. The commands that start with the # sign did not run.
B. Incomplete commands can cause CLI scripts to fail.
C. Static routes can be added using only TCI scripts.
D. CLI scripts must start with #!.

Answer: A,B

Explanation:
The commands that start with the # sign did not run because they are treated as comments in the CLI script.
Incomplete commands can cause CLI scripts to fail because they are not recognized by the FortiGate device.
The other options are incorrect because static routes can be added using CLI or GUI, and CLI scripts do not need to start with #!. References := Configuring custom scripts | FortiManager 7.2.0 - Fortinet Documentation, section "CLI script syntax".

NEW QUESTION # 36
You want to improve reliability over a lossy IPSec tunnel.
Which combination of IPSec phase 1 parameters should you configure?

A. Odpd and dpd-retryinterval
B. fec-ingress and fec-egress
C. fragmentation and fragmentation-mtu
D. keepalive and keylive

Answer: C

Explanation:
For improving reliability over a lossy IPSec tunnel, the fragmentation and fragmentation-mtu parameters should be configured. In scenarios where there might be issues with packet size or an unreliable network, setting the IPsec phase 1 to allow for fragmentation will enable large packets to be broken down, preventing them from being dropped due to size or poor network quality. The fragmentation-mtu specifies the size of the fragments. This is aligned with Fortinet's recommendations for handling IPsec VPN over networks with potential packet loss or size limitations.

NEW QUESTION # 37
Refer to the exhibits, which show the configurations of two address objects from the same FortiGate.

Why can you modify the Engineering address object, but not the Finance address object?

A. FortiGate joined the Security Fabric and the Finance address object was configured on the root FortiGate.
B. Another user is editing the Finance address object in workspace mode.
C. You have read-only access.
D. FortiGate is registered on FortiManager.

Answer: A

Explanation:
The inability to modify the Finance address object while being able to modify the Engineering address object suggests that the Finance object is being managed by a higher authority in the Security Fabric, likely the root FortiGate. When a FortiGate is part of a Security Fabric, address objects and other configurations may be managed centrally. This aligns with the Fortinet FortiGate documentation on Security Fabric and central management of address objects.

NEW QUESTION # 38
You created a VPN community using VPN Manager on FortiManager. You also added gateways to the VPN community. Now you are trying to create firewall policies to permit traffic over the tunnel however, the VPN interfaces do not appear as available options.

A. Configure the phase 1 settings in the VPN community that you didnt initially configure. FortiGate automatically generates the interfaces after you configure the required settings
B. Create interface mappings for the IPsec VPN interfaces before you use them in a policy.
C. Refresh the device status using the Device Manager so that FortiGate populates the IPSec interfaces
D. install the VPN community and gateway configuration on the fortiGate devices so that the VPN interfaces appear on the Policy Objects on fortiManager.

Answer: D

Explanation:
To use the VPN interfaces in a policy, you need to install the VPN community and gateway configuration on the FortiGate devices first. This will create the VPN interfaces on the FortiGate and sync them with FortiManager. References:
* Creating IPsec VPN communities
* VPN | FortiGate / FortiOS 7.2.0

NEW QUESTION # 39
......

The first goal of our company is to help all people to pass the NSE7_EFW-7.2 exam and get the related certification in the shortest time. Through years of concentrated efforts of our excellent experts and professors, our company has compiled the best helpful and useful NSE7_EFW-7.2 test training materials to meet all people’s demands, and in addition, we can assure to everyone that our study materials have a higher quality than other study materials in the global market, at the same time, these people will be easier to be admitted to the human resources supervisor. The NSE7_EFW-7.2 learn prep from our company has helped thousands of people to pass the exam and get the related certification, and then these people have enjoyed a better job and a better life. It has been generally accepted that the NSE7_EFW-7.2 study questions are of significance for a lot of people to pass the exam and get the related certification.

NSE7_EFW-7.2 Valid Exam Pdf: https://www.exam4labs.com/NSE7_EFW-7.2-practice-torrent.html

Report this page

PASS GUARANTEED FORTINET MARVELOUS NSE7_EFW-7.2 - REAL FORTINET NSE 7 - ENTERPRISE FIREWALL 7.2 QUESTION

Pass Guaranteed Fortinet Marvelous NSE7_EFW-7.2 - Real Fortinet NSE 7 - Enterprise Firewall 7.2 Question